In the past one hundred years, has been difficult in some way does not require Welding Electrode or aluminum of any product. The most common welding process has been in several forms of arc welding. In its most basic form, the process is actually very simple. Two similar metal. Put them together and then apply enough heat, increase the melting point close to. And then apply a patchwork of filler metals and fuse.

The basic arc welding using a machine to produce an adjustable current. This current through the wire, in its ultimate holding coated electrode device. Run wire from the welding machine, called the ground, and attached along the weld metal.

The next bit of metal in such a way, it completes the circuit between the establishment of an arc electrode and metal electrode. The arc produces heat heating metal parts and rod integration into welding, do the two metals, will be integrated into a single General Assembly. Certainly better than the more complex arc must adjust to a variety of metal rods and a variety of coating thickness can also be used for the metal.

The system is the most common varieties of steel is very good, you want to join pieces of nearly the same thickness. Basic arc Welding Fluxmachine is not working, need to be added to the thick, very thick slices. It is impossible to properly control the heat generated by the arc completely melted enough heat to make a thick metal with a thinner piece. In addition, exotic metals such as aluminum many times can not be submerged arc welding. In this case, the TIG welding machine excels.

His name is from a technical (tungsten inert gas) to derive a TIG welding machine is a system, the coated electrode in the basic arc so common standard. Contrary coated electrode shield welding for a variety of gases.

Argon arc welder called arc or GTIG-Heli (gas tungsten inert gas) welder. This system is indeed a state-of-the-art welding machine also uses a machine to generate electricity. Ground can also be used. At present is through a wire, but the difference in the end of the line of business, making this system work in secret.

Replaced by a clamp-held electrodes, TIG machine known as a short-term tungsten torch holders. The design of the torch issued a shield, from air pollution weld welding weld molten pool surrounding gas.

Use a different gas again depends on the welding. Many gas mixtures, argon is the most common gas. The torch is also provided within the flow of water to cool the torch.

An important feature of this system is that the arc heat fuse the metal is controlled by foot pedals, which makes it very easy to adjust the heat, thin pieces of Welding Rod a thick material. Bare filler rod is used to complete the welding. In addition, the tungsten rod Welding Materialsprocess does not consume, but it must reshape the go, because it is wearing welding.

This is basically described in the TIG welding process. Of course, there is more involved with any metal processing, especially aluminum and other special metal welding.