German production of laser Welding Wires Manufacturer is also divided into two categories:

One is based on argon produced by the wire electrode process, strictly speaking, can not be used in laser welding mode; the other is specifically developed for laser welding and laser welding wire special (such as DSI and QUADE laser welding). Use of laser welding is not, so in Germany, only two or three manufacturers of laser welding is a professional manufacturer of laser welding wire. Most other brands of the manufacturers or argon welding electrode manufacturer, laser welding for the production has not yet dedicated professional.

The use of laser welding in China with a wire, from the material points can be divided into the following categories:

1, if you choose the same with the mold base material when the laser welding wire with a metal bar, metal microstructure after melt with the mold base material will be inconsistent, from the impact of welding quality.

2, if you choose stainless steel wire, or close to the laser Mig Electrodes of stainless steel material used, the same problems could occur, and can not guarantee that the hardness after welding. Because less carbon stainless steel, hardness is low, after the welding position welding easy to wear.

3, for different mold materials, the choice of model for the wire not very strict, as long as welding followed by melting the base metal hardness access is good and consistent, we can achieve good weld quality.

4, mainly made of high quality wire and wire imported from Germany and Taiwan CmCtw Moldt series of wire, wire the country lower prices, higher prices of the German wire.

Wire model is commonly used in Germany MOLD 10, MOLD 50, MOLD 55 and MOLD 90.

Taiwan CmCtw wire models are CMC-SDK series, CMC-8407, CMC-MS-3, CMC-PX5, etc.